Hong Kong Regulations

ELECTRICAL PRODUCTS (SAFETY) REGULATION - SCHEDULE 1

ESSENTIAL SAFETY REQUIREMENTS FOR ELECTRICAL PRODUCTS

Caution: This is a past version. See the current version here.

[sections 2, 4 & 5 & Schedule 2]

1. General conditions

(1) The requirements in subsection (2), the recognition and observance of
which will ensure that an electrical product will be used safely in
applications for which it is made, shall be printed on the product in English,
Chinese or international standard symbols, or, if this is not possible, on an
accompanying notice.

(2) Such requirements shall include-

   (a)  rated voltage and frequency;

   (b)  rated input in terms of watts or kilowatts and amperes or
        milliamperes;

   (c)  model or type reference number; and

   (d)  manufacturer's name or trade mark.

(3) The electrical product, together with its component parts, shall be made
in such a way as to ensure that it can be safely and properly assembled and
connected.

2. Protection against hazards arising from an electrical product

An electrical product shall be so designed and constructed in order to ensure
that-

   (a)  persons and animals are adequately protected against danger of
        physical injury or other harm which might be caused by electrical
        contact whether direct or indirect;

   (b)  temperatures, arcs or radiation which are not part of the intended
        function of the product, and likely to cause a danger, are not
        produced;

   (c)  persons, animals and property are adequately protected against
        non-electrical danger caused by the electrical product which are
        revealed by experience;

   (d)  persons and animals are adequately protected against danger due to
        hazardous materials used in the electrical product; and

   (e)  the insulation is suitable for foreseeable conditions.

3. Protection against hazards which may be caused by external influences on an
electrical product

An electrical product shall be so designed and constructed in order to ensure
that-

   (a)  the electrical product meets the expected mechanical requirements in
        such a way that persons, animals and property are adequately protected
        against danger caused by the electrical product;

   (b)  the electrical product is resistant to non-mechanical influences in
        expected environmental conditions, in such a way that persons, animals
        and property are adequately protected against danger caused by the
        electrical product;

   (c)  in foreseeable conditions of overload, persons, animals and property
        are adequately protected against danger caused by the electrical
        product; and

   (d)  the electrical product, other than a fixed and hand-held  product, has
        such stability that it can be maintained in a specific position.