Hong Kong Ordinances
[Index]
[Table]
[Search]
[Notes]
[Noteup]
[Previous]
[Next]
[Download (Current & Past)]
[Download (Current only)]
[繁體中文]
[Help]
CONSTRUCTION WORKERS REGISTRATION ORDINANCE - SCHEDULE 1
DESIGNATED TRADES
(Past version on 28/02/2007).
(Past version on 18/09/2004).
[sections 2, 3, 4, 6, 39,
40, 41, 42,
48 & 65]
PART 1
DESIGNATED TRADES FOR WHICH A PERSON MAY BE REGISTERED
ONLY AS A REGISTERED SKILLED WORKER OR REGISTERED
SKILLED WORKER (PROVISIONAL), AS THE CASE MAY BE
Column 1 Column 2 Column 3 Column 4
Name of trade or
occupation
Description of work
Certificate
Other qualifications
1. Asbestos Abatement Worker To carry out asbestos abatement works Trade test
certificate for Asbestos Abatement Worker issued by CITA or CIC Not applicable
2. Asphalter (Road Construction) (a) To mix, place and compact bituminous materials using
vibrating machines
(b) To level and smoothen bituminous materials according to specified
level marks Trade test certificate for Asphalter (Road Construction) issued by
CITA or CIC Not applicable
3. Asphalter (Waterproofing) (a) To lay sheathing felt or paint with primer
(b) To pour hot asphalt or proprietary waterproofing materials on prepared
surfaces
(c) To spread and level hot asphalt or proprietary waterproofing materials
to fit corners, skirtings, flashings and outlets Trade test certificate for
Asphalter (Waterproofing) issued by CITA or CIC Not applicable
4. Cable Jointer (Power) (a) To join low voltage cables either with the circuits
dead or with one or both cables energized
(b) To join dead cables of voltages not exceeding 11 kV (Amended L.N. 3
of 2007) Certificate of completion of an apprenticeship in the trade of cable
jointer (power) given under section 28 of the Apprenticeship Ordinance
(Cap 47) Not applicable
5. Carpenter (Fender) To remove, cut, and erect timber fenders for protection of
piers, seawalls, dolphins and landing steps Trade test certificate for Carpenter
(Fender) issued by CITA or CIC Not applicable
6. Concrete Repairer (Spalling Concrete) To repair substandard or spalled concrete or
reinforcement bars using concrete or other approved materials Trade test certificate
for Concrete Repairer (Spalling Concrete) issued by CITA or CIC Not applicable
7. Curtain Wall Installer To install metal frames, and fix glasses or other material
panels, for curtain walls Trade test certificate for Curtain Wall Installer
issued by CITA or CIC Not applicable
8. Demolition Worker (Building) To demolish, dismantle and remove buildings and
structures, or any part thereof Trade test certificate for Demolition Worker
(Building) issued by CITA or CIC Not applicable
9. Demolition Worker (Unauthorized Building Works) To demolish, dismantle and
remove buildings erected, or building works carried out, in contravention
of the Buildings Ordinance (Cap 123) within the meaning of that Ordinance Trade test
certificate for Demolition Worker (Unauthorized Building Works) issued by
CITA or CIC Not applicable
10. Diver (a) To perform underwater operations related to inspection,
construction and repair of structures and demolition
(b) To prepare reports on all the foregoing operations Not applicable Any one of the
following—
(a) diving certificate for the class of Advanced SCUBA Diver or above
issued by the National Association of Underwater Instructors of the United
States of America;
(b) diving certificate approved by the Health and Safety Executive of the
United Kingdom; or
(c) diving certificate issued by the Ministry of Communications of the
People's Republic of China (Amended L.N. 3 of 2007)
11. Electrical Fitter (a) To install, test, commission and repair electrical
installations and wiring
(b) To fit, assemble, install, test, commission and repair electrical
systems and equipment Not applicable Certificate of registration as an electrical worker for
Grade A, B, C or H electrical work issued under section 30 of the
Electricity Ordinance (Cap 406)
12. Escalator Mechanic To install, adjust, maintain and repair escalators Not applicable Competent
escalator worker within the meaning of section 29A(4) of the Lifts and
Escalators (Safety) Ordinance (Cap 327)
13. Fire Service Mechanic (a) To install, test, inspect, maintain and
repair fire services piping systems, automatic fire alarm systems, manual
fire alarm systems, mechanical or electrical or electronic parts of fire
services systems
(b) To maintain, inspect and repair portable fire services equipment Not applicable Both of the
following—
(a) fire service installation contractor class 3 registered under the Fire
Service (Installation Contractors) Regulations (Cap 95 sub. leg. A); and
(b) trade certificate for Fire Service Mechanic issued by VTC
14. Fire Service Portable Equipment Fitter To maintain, inspect and repair
portable fire services equipment Not applicable Fire service installation contractor class 3
registered under the Fire Service (Installation Contractors) Regulations
(Cap 95 sub. leg. A)
15. Gas Installer To install, commission, maintain and repair domestic and
non-domestic gas appliances, gas fittings, and gas flow control and meters
connected to gas cylinders or gas supply points Not applicable Gas installer registered to
carry out gas installation work under regulation 7(1)(a) of the Gas Safety
(Registration of Gas Installers and Gas Contractors) Regulations (Cap 51
sub. leg. D)
16. Grouting Worker To mix cement or other materials to carry out underground
grouting work Trade test certificate for Grouting Worker issued by CITA or CIC Not
applicable
17. Lift Mechanic To install, adjust, maintain and repair lifts Not applicable Competent
lift worker within the meaning of section 29A(4) of the Lifts and
Escalators (Safety) Ordinance (Cap 327)
18. Marine Construction Plant Operator (Boom-grab Bucket) To operate boom-grab
buckets for construction work at sea Trade test certificate for Marine
Construction Plant Operator (Boom-grab Bucket) issued by CITA or CIC Not
applicable
19. Marine Construction Plant Operator (Boom-hook) To operate boom-hooks
for construction work at sea Trade test certificate for Marine Construction
Plant Operator (Boom-hook) issued by CITA or CIC Not applicable
20. Marine construction Plant Operator (Derrick) To operate derricks for construction
work at sea Trade test certificate for Marine Construction Plant Operator
(Derrick) issued by CITA or CIC Not applicable
21. Overhead Linesman To construct, maintain and repair overhead line
systems of voltages not exceeding 11 kV on tubular steel, concrete,
lattice girder or wood supports (Amended L.N. 3 of 2007) Certificate of
completion of an apprenticeship in the trade of overhead linesman given
under section 28 of the Apprenticeship Ordinance (Cap 47) Not applicable
22. Paving Block Layer (a) To lay paving blocks on floor
(b) To compact the base layer with vibrating machines
(c) To cut paving blocks to fit floor layout Trade test certificate for Paving
Block Layer issued by CITA or CIC Not applicable
23. Piling Operative To set up piling rigs for driven or bored piles works Both of the
following—
(a) trade test certificate for Piling Operative (Bored Pile) issued by
CITA or CIC; and
(b) trade test certificate for Piling Operative (Percussive Pile) issued
by CITA or CIC Not applicable
24. Piling Operative (Bored Pile) To set up piling rigs for bored piles works Trade
test certificate for Piling Operative (Bored Pile) issued by CITA or CIC Not
applicable
25. Piling Operative (Percussive Pile) To set up piling rigs for driven piles
works Trade test certificate for Piling Operative (Percussive Pile) issued by
CITA or CIC Not applicable
26. Pipelayer To lay water mains, make pressurized joints by mechanical
means, install pipes and fittings, construct beds and haunches, and
surround pipes with concrete Trade test certificate for Pipelayer issued by CITA or
CIC Not applicable
27. Plant and Equipment Operator (Bored Pile) To operate piling machines for
bored piles works Trade test certificate for Plant and Equipment Operator (Bored
Pile) issued by CITA or CIC Not applicable
28. Plant and Equipment Operator (Bulldozer) To operate bulldozers for load shifting
purposes Not applicable Certificate as defined in section 2(1) of the Factories and Industrial
Undertakings (Loadshifting Machinery) Regulation (Cap 59 sub. leg. AG) and
applicable to bulldozers
29. Plant and Equipment Operator (Crawler-mounted Mobile Crane) To operate
crawler-mounted mobile cranes for material handling purposes Not applicable Certificate
referred to in regulation 15A(1)(b) of the Factories and Industrial
Undertakings (Lifting Appliances and Lifting Gear) Regulations (Cap 59
sub. leg. J) and applicable to Crawler-mounted Mobile Cranes
30. Plant and Equipment Operator (Demolition)—Excavator To operate excavators to
demolish, dismantle and remove buildings or structures, or any part thereof Not
applicable Both of the following—
(a) trade test certificate for Plant and Equipment Operator (Demolition)—
Excavator issued by CITA or CIC; and
(b) certificate as defined in section 2(1) of the Factories and Industrial
Undertakings (Loadshifting Machinery) Regulation (Cap 59 sub. leg. AG) and
applicable to excavators
31. Plant and Equipment Operator (Excavator) To operate excavators for load shifting
purposes Not applicable Certificate as defined in section 2(1) of the Factories and
Industrial Undertakings (Loadshifting Machinery) Regulation (Cap 59 sub.
leg. AG) and applicable to excavators
32. Plant and Equipment Operator (Gantry Crane) To operate gantry cranes for
material handling purposes Not applicable Certificate referred to in regulation 15A(1)(b) of
the Factories and Industrial Undertakings (Lifting Appliances and Lifting
Gear) Regulations (Cap 59 sub. leg. J) and applicable to Gantry Cranes
33. Plant and Equipment Operator (Loader) To operate loaders for load shifting
purposes Not applicable Certificate as defined in section 2(1) of the Factories and Industrial
Undertakings (Loadshifting Machinery) Regulation (Cap 59 sub. leg. AG) and
applicable to loaders
34. Plant and Equipment Operator (Mini-loader) To operate mini-loaders for load shifting
purposes Not applicable Certificate as defined in section 2(1) of the Factories and Industrial
Undertakings (Loadshifting Machinery) Regulation (Cap 59 sub. leg. AG) and
applicable to mini-loaders
35. Plant and Equipment Operator (Mini-loader (with Attachments)) To operate mini-loaders
with attachments for load shifting purposes Not applicable Certificate as defined in section
2(1) of the Factories and Industrial Undertakings (Loadshifting Machinery)
Regulation (Cap 59 sub. leg. AG) and applicable to mini-loaders (with
attachments)
36. Plant and Equipment Operator (Percussive Pile) To operate piling machines for
driven piles works Trade test certificate for Plant and Equipment Operator
(Percussive Pile) issued by CITA or CIC Not applicable
37. Plant and Equipment Operator (Piling) To operate piling machines for driven or
bored piles works Both of the following—
(a) trade test certificate for Plant and Equipment Operator (Bored Pile)
issued by CITA or CIC; and
(b) trade test certificate for Plant and Equipment Operator (Percussive
Pile) issued by CITA or CIC Not applicable
38. Plant and Equipment Operator (Suspended Working Platform) To operate suspended
working platforms for carrying persons Not applicable Certificate referred to in section
17(1)(b) of the Factories and Industrial Undertakings (Suspended Working
Platforms) Regulation (Cap 59 sub. leg. AC)
39. Plant and Equipment Operator (Tower Crane) To operate tower cranes for
material handling purposes Not applicable Certificate referred to in regulation 15A(1)(b) of
the Factories and Industrial Undertakings (Lifting Appliances and Lifting
Gear) Regulations (Cap 59 sub. leg. J) and applicable to Tower Cranes
40. Plant and Equipment Operator (Truck-mounted Crane) To operate truck-mounted
cranes for material handling purposes Not applicable Certificate referred to in regulation
15A(1)(b) of the Factories and Industrial Undertakings (Lifting Appliances
and Lifting Gear) Regulations (Cap 59 sub. leg. J) and applicable to
Truck-mounted Cranes
41. Plant and Equipment Operator (Tunneling)—Jumbo Drilling To operate jumbo
drilling machines inside tunnels Trade test certificate for Plant and Equipment
Operator (Tunneling)— Jumbo Drilling issued by CITA or CIC Not applicable
42. Plant and Equipment Operator (Tunneling)—Locomotive Operation To operate
locomotives inside tunnels Trade test certificate for Plant and Equipment Operator
(Tunneling)—Locomotive Operation issued by CITA or CIC Not applicable
43. Plant and Equipment Operator (Tunneling)—Segment Erection To operate segment
erection machines inside tunnels Trade test certificate for Plant and Equipment
Operator (Tunneling)—Segment Erection issued by CITA or CIC Not applicable
44. Plant and Equipment Operator (Tunneling)—Tunnel Boring Machine To operate
tunnel boring machines inside tunnels Certificate for Plant and Equipment Operator
(Tunneling)—Tunnel Boring Machine issued by CITA or CIC Not applicable
45. Plant and Equipment Operator (Wheeled Telescopic Mobile Crane) To operate
wheeled telescopic mobile cranes for material handling purposes Not applicable Certificate
referred to in regulation 15A(1)(b) of the Factories and Industrial
Undertakings (Lifting Appliances and Lifting Gear) Regulations (Cap 59
sub. leg. J) and applicable to Wheeled Telescopic Mobile Cranes
46. Prestressing Operative (a) To lay and fix prestressing tendons and ducts
(b) To assemble prestressing couplings and anchorages and perform
prestressing operations and grouting of ducts Trade test certificate for
Prestressing Operative issued by CITA or CIC Not applicable
47. Refrigeration/
Air-conditioning/
Ventilation Mechanic To fit, assemble, erect, install, commission, maintain and
repair—
(a) air-conditioning systems including refrigerating, air-handling and
ventilation equipment and the associated electrical controls;
(b) cold stores, ice-making and other refrigerating equipment;
(c) air-conditioning and ventilation equipment forming part of fire
services systems Either one of the following—
(a) trade certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic issued by VTC; or
(b) certificate of completion of an apprenticeship in the trade of
refrigeration/
air-conditioning mechanic given under section 28 of the Apprenticeship
Ordinance (Cap 47) Not applicable
48. Rock Breaking Driller To operate pneumatic or hydraulic drills to make holes
and openings or break up concrete, rocks or other hard materials Trade test
certificate for Rock Breaking Driller issued by CITA or CIC Not applicable
49. Shotcretor To operate spraying machines to apply shotcrete or gunite
Trade test certificate for Shotcretor issued by CITA or CIC Not applicable
50. Shotfirer To calculate, prepare, load and detonate explosive charges
in mines, quarries, civil engineering and building sites Not applicable Mine blasting
certificate issued under the Mines (Safety) Regulations (Cap 285 sub. leg.
B)
51. Structural Steel Welder To cut or join structural steel sections, steel water
mains and steel gas mains by electric arc, oxy-acetylene flame or other
welding processes Not applicable Certificate (whether subsisting or expired) of passing of a
welder test which is in conformity with BS EN 287-1:1992 standard
including its amendments issued by a welding inspection body accredited by
the Hong Kong Accreditation Service under Hong Kong Laboratory
Accreditation Scheme (Amended L.N. 3 of 2007)
52. Trackworker To lay and maintain trackworks for railways or other vehicles Trade
test certificate for Trackworker issued by CITA or CIC Not applicable
52A. Truck Driver (Articulated vehicles) To drive, within, into or out of
construction sites, for the purpose of carrying out construction work,
articulated vehicles which— (Amended L.N. 23 of 2007)
(a) are within the meaning of regulation 2 of the Road Traffic
(Construction and Maintenance of Vehicles) Regulations (Cap 374 sub. leg.
A); and
(b) belong to either one of the following types of body—
(i) pressure tanker;
(ii) tipper Not applicable Full driving licence within the meaning of the Road Traffic
(Driving Licences) Regulations (Cap 374 sub. leg. B) to drive an
articulated vehicle (Added L.N. 3 of 2007)
53. Truck Driver (Heavy goods vehicles) To drive, within, into or out of construction
sites, for the purpose of carrying out construction work, heavy goods
vehicles which— (Amended L.N. 23 of 2007)
(a) are within the meaning of section 2 of the Road Traffic Ordinance (Cap
374); and
(b) belong to one of the following types of body—
(i) skip carrier;
(ii) tanker;
(iii) pressure tanker;
(iv) lorry crane;
(v) gully emptier;
(vi) demountable;
(vii) tipper;
(viii) concrete mixer (Amended L.N. 3 of 2007) Not applicable Full driving licence within
the meaning of the Road Traffic (Driving Licences) Regulations (Cap 374
sub. leg. B) to drive a heavy goods vehicle
54. Truck Driver (Medium goods vehicles) To drive, within, into or out of
construction sites, for the purpose of carrying out construction work,
medium goods vehicles which— (Amended L.N. 23 of 2007)
(a) are within the meaning of section 2 of the Road Traffic Ordinance (Cap
374); and
(b) belong to one of the following types of body—
(i) skip carrier;
(ii) tanker;
(iii) pressure tanker;
(iv) lorry crane;
(v) gully emptier;
(vi) demountable;
(vii) tipper;
(viii) concrete mixer (Amended L.N. 3 of 2007) Not applicable Full driving licence within
the meaning of the Road Traffic (Driving Licences) Regulations (Cap 374
sub. leg. B) to drive a medium goods vehicle
55. Truck Driver (Special purpose vehicles) To drive, within, into or out of
construction sites, for the purpose of carrying out construction work,
special purpose vehicles which— (Amended L.N. 23 of 2007)
(a) are within the meaning of section 2 of the Road Traffic Ordinance (Cap
374); and
(b) belong to one of the following types of body—
(i) mobile crane;
(ii) aerial platform;
(iii) works tug;
(iv) mobile workshop;
(v) mobile concrete pump;
(vi) traffic warning sign (Amended L.N. 3 of 2007) Not applicable Full driving licence
within the meaning of the Road Traffic (Driving Licences) Regulations (Cap
374 sub. leg. B) to drive a special purpose vehicle
56. Tunnel Worker To carry out general construction work inside tunnels, including
installing of temporary supports and working platforms, ventilation ducts,
packers and protective fencings Trade test certificate for Tunnel Worker issued by
CITA or CIC Not applicable
PART 2
DESIGNATED TRADES FOR WHICH A PERSON MAY BE REGISTERED
AS A REGISTERED SKILLED WORKERS, REGISTERED SKILLED
WORKER (PROVISIONAL), REGISTERED SEMI-SKILLED
WORKER OR REGISTERED SEMI-SKILLED WORKER
(PROVISIONAL), AS THE CASE MAY BE
Column 1 Column 2 Column 3 Column 4 Column 5
Name of trade or occupation
Description of work
Certificate
Other qualifications Intermediate trade test certificate
1. Bamboo Scaffolder To erect and dismantle bamboo scaffolding required in
construction, repair or decoration work and in other forms of structures Either one
of the following—
(a) trade test certificate for Bamboo Scaffolder issued by CITA or CIC; or
(b) certificate of completion of an apprenticeship in the trade of bamboo
scaffolder given under section 28 of the Apprenticeship Ordinance (Cap 47) Not
applicable Intermediate trade test certificate for Bamboo Scaffolder issued by CITA
or CIC
2. Bar Bender and Fixer To cut, bend and fix reinforcement steel bars Trade test
certificate for Bar Bender and Fixer issued by CITA or CIC Not applicable Intermediate
trade test certificate for Bar Bender and Fixer issued by CITA or CIC
3. Bricklayer To lay bricks and other building blocks, except stones and
marble, for construction and repair of walls, partitions, arches, openings
and other structures Either one of the following—
(a) trade test certificate for Bricklayer issued by CITA or CIC; or
(b) certificate of completion of an apprenticeship in the trade of
bricklayer given under section 28 of the Apprenticeship Ordinance (Cap 47) Not
applicable Intermediate trade test certificate for Bricklayer issued by CITA or CIC
4. Building Security System Mechanic To install, maintain and repair building
security systems, including building doorphone systems, closed circuit
television systems, public address systems, security alarm systems, access
control systems, and building control and monitoring systems Trade certificate or
Building Security System Mechanic issued by VTC Not applicable Intermediate trade test
certificate for Building Security System Mechanic issued by VTC
5. Carpenter (Formwork-
Building Construction) To erect and strike timber formwork for building works Either one of
the following—
(a) trade test certificate for Carpenter (Formwork-
Building Construction) issued by CITA or CIC; or
(b) trade test certificate for Carpenter (Formwork) issued by CITA or CIC Not
applicable Either one of the following—
(a) intermediate trade test certificate for Carpenter (Formwork-
Building Construction) issued by CITA or CIC; or
(b) intermediate trade test certificate for Carpenter (Formwork) issued by
CITA or CIC
6. Carpenter (Formwork-
Civil Construction) To erect and strike timber formwork for construction work related to
civil engineering Either one of the following—
(a) trade test certificate for Carpenter (Formwork-Civil Construction)
issued by CITA or CIC; or
(b) trade test certificate for Carpenter (Formwork) issued by CITA or CIC Not
applicable Either one of the following—
(a) intermediate trade test certificate for Carpenter (Formwork-Civil
Construction) issued by CITA or CIC; or
(b) intermediate trade test certificate for Carpenter (Formwork) issued by
CITA or CIC
7. Com-
munication
System Mechanic To fit, assemble, install, maintain and repair communication
equipment and systems, including block wiring systems, private automatic
branch exchange systems, intercom systems, in-building coaxial cable
distribution systems, and other wired or wireless signal transmission and
reception systems Trade certificate for Communication System Mechanic issued by VTC
Not applicable Intermediate trade test certificate for Communication System Mechanic
issued by VTC
8. Concretor (a) To mix, place and compact concrete using vibrating machines
(b) To carry out curing, levelling and smoothening of concrete Trade test
certificate for Concretor issued by CITA or CIC Not applicable Intermediate trade test
certificate for Concretor issued by CITA or CIC
9. Construction
Plant Mechanic To maintain and repair building and civil engineering plants and
machinery Either one of the following—
(a) trade test certificate for Construction Plant Mechanic issued by CITA
or CIC; or
(b) certificate of completion of an apprenticeship in the trade of
construction plant mechanic given under section 28 of the Apprenticeship
Ordinance (Cap 47) Not applicable Intermediate trade test certificate for Construction
Plant Mechanic issued by CITA or CIC
10. Control Panel Assembler To fit, assemble, install and repair low voltage
switchboards, and control panels, for electrical plants and equipment Trade
certificate for Control Panel Assembler issued by VTC Not applicable Intermediate trade
test certificate for Control Panel Assembler issued by VTC
11. Drainlayer To lay and join underground drains, construct manholes,
install pipes and fittings, construct beds and haunches, and surround
pipes with concrete Trade test certificate for Drainlayer issued by CITA or CIC Not
applicable Intermediate trade test certificate for Drainlayer issued by CITA or CIC
12. Electrical Wireman To install and lay wiring for electrical systems and
equipment Trade certificate for Electrical Wireman issued by VTC Not applicable Intermediate trade
test certificate for Electrical Wireman issued by VTC
13. Fire Service Electrical Fitter To install, test, maintain, inspect and repair
automatic fire alarm systems, manual fire alarm systems, and electrical or
electronic parts of fire services systems Trade certificate for Fire Service
Electrical Fitter issued by VTC Not applicable Intermediate trade test certificate for
Fire Service Electrical Fitter issued by VTC
14. Fire Service Mechanical Fitter To install, test, maintain, inspect and repair
fire services piping systems and mechanical parts of fire services systems Trade
certificate for Fire Service Mechanical Fitter issued by VTC Not applicable Intermediate
trade test certificate for Fire Service Mechanical Fitter issued by VTC
15. Floor Layer To lay timber, PVC, linoleum and similar flooring materials to
floors, stair threads and skirtings Both of the following—
(a) trade test certificate for Floor Layer (PVC Flooring) issued by CITA
or CIC; and
(b) trade test certificate for Floor Layer (Timber Flooring) issued by
CITA or CIC Not applicable Both of the following—
(a) intermediate trade test certificate for Floor Layer (PVC Flooring)
issued by CITA or CIC; and
(b) intermediate trade test certificate for Floor Layer (Timber Flooring)
issued by CITA or CIC
16. Floor Layer (PVC Flooring) To lay PVC, linoleum and similar flooring materials to
floors, stair threads and skirtings Trade test certificate for Floor Layer (PVC
Flooring) issued by CITA or CIC Not applicable Intermediate trade test certificate for
Floor Layer (PVC Flooring) issued by CITA or CIC
17. Floor Layer (Timber Flooring) To lay timber and similar flooring materials to
floors, stair threads and skirtings Trade test certificate for Floor Layer (Timber
Flooring) issued by CITA or CIC Not applicable Intermediate trade test certificate for
Floor Layer (Timber Flooring) issued by CITA or CIC
18. General Welder To carry out general welding and cutting work by electric arc,
oxy-acetylene flame or other welding processes Trade test certificate for General
Welder issued by CITA or CIC Not applicable Intermediate trade test certificate for
General Welder issued by CITA or CIC
19. Glazier (a) To measure, cut and fix glass panes with silicone plastic or
beads
(b) To grind or round edges of glass panes Trade test certificate for Glazier
issued by CITA or CIC Not applicable Intermediate trade test certificate for Glazier
issued by CITA or CIC
20. Ground Investigation Operator/
Driller/Borer (a) To set up and operate drilling plants for ground
investigation purposes
(b) To take and store soil, and rock samples or specimens, for inspection
and logging by engineers or technicians or logging geologists
(c) To work with geotechnical field technicians to perform in situ field
tests Trade test certificate for Ground Investigation Operator issued by CITA or
CIC Not applicable Intermediate trade test certificate for Ground Investigation Operator
issued by CITA or CIC
21. Hand-dug Caisson Worker To construct underground caissons by hand-dug caisson
method Trade test certificate for Hand-dug Caisson Worker issued by CITA or CIC Not
applicable Intermediate trade test certificate for Hand-dug Caisson Worker issued by
CITA or CIC
22. Joiner To carry out all internal and external woodwork (except formwork
and fender) using both hand tools and woodworking machinery Either one of the
following—
(a) trade test certificate for Joiner issued by CITA or CIC; or
(b) certificate of completion of an apprenticeship in the trade of
carpenter/
joiner given under section 28 of the Apprenticeship Ordinance (Cap 47) Not
applicable Intermediate trade test certificate for Joiner issued by CITA or CIC
23. Leveller (a) To read and interpret drawings
(b) To set up job lines and levels and prepare templates Trade test certificate for
Leveller issued by CITA or CIC Not applicable Intermediate trade test certificate for
Leveller issued by CITA or CIC
24. Marble Worker (a) To set out, measure, cut and set marble slabs, granite slabs
or similar stones on walls, floors, or other surfaces
(b) To grind and polish marble, granite or similar stones Trade test certificate
for Marble Worker issued by CITA or CIC Not applicable Intermediate trade test
certificate for Marble Worker issued by CITA or CIC
25. Mason To split and shape stones, and build and lay stone works Trade test
certificate for Mason issued by CITA or CIC Not applicable Intermediate trade test
certificate for Mason issued by CITA or CIC
26. Mechanical Fitter To fit, assemble, erect, install, maintain and repair
mechanical plants and equipment, including emergency generators Either one
of the following—
(a) trade certificate for Mechanical Fitter issued by VTC; or
(b) certificate of completion of an apprenticeship in the trade of fitter
given under section 28 of the Apprenticeship Ordinance (Cap 47) Not applicable
Intermediate trade test certificate for Mechanical Fitter issued by VTC
27. Metal Scaffolder To erect, dismantle and repair metal scaffolding required in
construction work Trade test certificate for Metal Scaffolder issued by CITA or
CIC Not applicable Intermediate trade test certificate for Metal Scaffolder issued by
CITA or CIC
28. Metal Worker (a) To fit, assemble, weld and forge metal parts
(b) To install non-structural metalwork
(c) To operate metal-working machines
(d) To make templates
(e) To repair metal formwork Trade test certificate for Metal Worker
issued by CITA or CIC Not applicable Intermediate trade test certificate for Metal Worker
issued by CITA or CIC
29. Painter and Decorator (a) To prepare surfaces, fittings and fixtures of buildings
and other structures for painting and decorating
(b) To apply paints or similar protective and decorative materials
(c) To lay out and write letters, characters and other signs Either one of the
following—
(a) trade test certificate for Painter and Decorator issued by CITA or
CIC; or
(b) certificate of completion of an apprenticeship in the trade of painter/
decorator/sign writer given under section 28 of the Apprenticeship
Ordinance (Cap 47) Not applicable Intermediate trade test certificate for Painter and
Decorator issued by CITA or CIC
30. Plasterer (a) To apply coats of plaster to, and to render walls and
ceilings, to produce finished surfaces
(b) To screed floors, staircases and roofs Either one of the following—
(a) trade test certificate for Plasterer issued by CITA or CIC; or
(b) certificate of completion of an apprenticeship in the trade of
plasterer given under section 28 of the Apprenticeship Ordinance (Cap 47) Not
applicable Intermediate trade test certificate for Plasterer issued by CITA or CIC
31. Plumber To assemble, install and repair pipes, fittings, sanitary
fixtures, cold, hot and flush water systems, and soil, waste and rain
water drainage systems in buildings Either one of the following—
(a) trade test certificate for Plumber issued by CITA or CIC;
(b) certificate of completion of an apprenticeship in the trade of plumber
given under section 28 of the Apprenticeship Ordinance (Cap 47); or
(c) plumber's licence issued under regulation 34 of the Waterworks
Regulations (Cap 102 sub. leg. A) Not applicable Intermediate trade test certificate for
Plumber issued by CITA or CIC
32. Re-
frigeration/
Air-
conditioning/
Ventilation Mechanic
(Air System) To fabricate, install and repair sheet metal assemblies and products
(including ventilation ducting, dampers, fire resistant board and fittings) Trade
certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Air System) issued by VTC Not applicable Intermediate trade test
certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Air System) issued by VTC
33. Re-
frigeration/
Air-
conditioning/
Ventilation Mechanic (Electrical Control) To fit, assemble, install, commission,
maintain and repair electrical control for—
(a) air-conditioning systems including refrigerating, air-handling and
ventilation equipment;
(b) cold stores, ice-making and other refrigerating equipment;
(c) air-conditioning and ventilation equipment forming part of fire
services systems Either one of the following—
(a) trade certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic
(Electrical Control) issued by VTC; or
(b) certificate of registration as an electrical worker issued under
section 30 of the Electricity Ordinance (Cap 406) on which the Director of
Electrical and Mechanical Services specifies that the holder is entitled
to do electrical work on an air-conditioning installation Not applicable Intermediate trade test
certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Electrical Control) issued by VTC
34. Re-
frigeration/
Air-
conditioning/
Ventilation Mechanic (Thermal Insulation) To prepare, fit, fix and repair thermal
insulations of air-conditioning and refrigeration plants Trade certificate for
Refrigeration/
Air-conditioning/
Ventilation Mechanic (Thermal Insulation) issued by VTC Not applicable Intermediate trade
test certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Thermal Insulation) issued by VTC
35. Re-
frigeration/
Air-
conditioning/
Ventilation Mechanic (Unitary System) To fit, assemble, install, commission,
maintain and repair—
(a) unitary air-conditioning/
systems including refrigerating, air-handling and ventilation equipment;
(b) unitary cold stores, ice-making and other refrigerating equipment Trade
certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Unitary System) issued by VTC Not applicable Intermediate trade
test certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Unitary System) issued by VTC
36. Re-
frigeration/
Air-
conditioning/
Ventilation Mechanic (Water System) To fit, assemble, install, commission,
maintain and repair water systems for air-conditioning systems (including
air-handling and water condensing equipment) Trade certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Water System) issued by VTC Not applicable Intermediate trade test
certificate for Refrigeration/
Air-conditioning/
Ventilation Mechanic (Water System) issued by VTC
37. Rigger/Metal Formwork Erector (a) To set up lifting apparatus and equipment for
lifting and lowering of materials
(b) To fix and dismantle large panel metal formwork Trade test certificate for
Rigger/Metal Formwork Erector issued by CITA or CIC Not applicable Intermediate trade
test certificate for Rigger/Metal Formwork Erector issued by CITA or CIC
38. Structural Steel Erector (a) To drill, cut and shape steel sections
(b) To assemble structural members and erect steel structures by riveting
or bolting
(c) To operate power shears, flame cutting equipment and other tools Trade test
certificate for Structural Steel Erector issued by CITA or CIC Not applicable
Intermediate trade test certificate for Structural Steel Erector issued by
CITA or CIC
39. Tiler To cut, shape and set tiles on walls, ceilings and floors Either one of
the following—
(a) trade test certificate for Tiler issued by CITA or CIC; or
(b) certificate of completion of an apprenticeship in the trade of tiler
given under section 28 of the Apprenticeship Ordinance (Cap 47) Not applicable
Intermediate trade test certificate for Tiler issued by CITA or CIC
40. Window Frame Installer To install window frames and sash (including associated
water proofing works) for buildings or other structures Trade test certificate for
Window Frame Installer issued by CITA or CIC Not applicable Intermediate trade test
certificate for Window Frame Installer issued by CITA or CIC
PART 3
DESIGNATED TRADES FOR WHICH A PERSON MAY BE REGISTERED
ONLY AS A REGISTERED SEMI-SKILLED WORKER OR REGISTERED
SEMI-SKILLED WORKER (PROVISIONAL), AS THE CASE MAY BE
Column 1 Column 2 Column 3 Column 4
Name of trade or
occupation
Description of work Intermediate trade test certificate
Other qualifications
1. Painter (Texture-spray) To perform painting for surfaces, fittings and fixtures of
buildings and other structures by texture-spray method Intermediate trade test
certificate for Painter (Texture-spray) issued by CITA or CIC Not applicable
2. Builder's Lift Operator To operate builders' lifts (passenger hoist) on
construction sites Not applicable Competent operator for builder's lift within the meaning
of the Builders' Lifts and Tower Working Platforms (Safety) Ordinance (Cap
470)
(Amended 12 of 2006 s. 84)
[Index]
[Table]
[Search]
[Notes]
[Noteup]
[Previous]
[Next]
[Download (Current & Past)]
[Download (Current only)]
[繁體中文]
[Help]